Bambu Lab PLA Matte
.د.ب 12.220 – .د.ب 14.720 (-13%)
THE FILAMENT IN OUR STORE OUTSIDE OF BAHRAIN.
MINIMUM ORDER IS 5 PIECES.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | All Size / Material | / |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
PLA Matte Hex Code Table
| Color | Hex Code | Display |
| Ivory White | #FFFFFF | |
| Latte Brown | #D3B7A7 | |
| Ash Gray | #9B9EA0 | |
| Lilac Purple | #AE96D4 | |
| Sakura Pink | #E8AFCF | |
| Mandarin Orange | #F99963 | |
| Lemon Yellow | #F7D959 | |
| Scarlet Red | #DE4343 | |
| Dark Red | #BB3D43 | |
| Dark Brown | #7D6556 | |
| Dark Green | #68724D | |
| Grass Green | #61C680 | |
| Ice Blue | #A3D8E1 | |
| Marine Blue | #0078BF | |
| Dark Blue | #042F56 | |
| Charcoal | #000000 |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 190 – 230 °C |
| Bed Temperature (with Glue) | 35 – 45 °C |
| Printing Speed | < 300 mm/s |
| Physical Properties | |
| Density | 1.31 g/cm³ |
| Vicar Softening Temperature | 63 °C |
| Heat Deflection Temperature | 58 °C |
| Melting Temperature | 163 °C |
| Melt Index | 39.4 ± 3.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 30 ± 5 MPa |
| Breaking Elongation Rate | 14.8 ± 4.2 % |
| Bending Modulus | 2360 ± 250 MPa |
| Bending Strength | 53 ± 6 MPa |
| Impact Strength | 19.2 ± 3.7 kJ/m² |
Downloads
Printing Tips
• Drying PLA Matte is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer’s heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
What’s in the Box:
Filament*1 & Desiccant*1
Instructions*1 & Spool Sticker*1
Package*1
Filament Label*1
Print Your Own Spool Now
Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!
Instructions for Printed Spool
When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
Additional information
| Weight | N/A |
|---|---|
| Type | "Filament With Spool", "Refill Filament" |
| Color | "Ivory White", "Latte Brown", "Desert Tan", "Charcoal", "Ash Gray", "Lilac Purple", "Sakura Pink", "Mandarin Orange", "Scarlet Red", "Dark Brown", "Grass Green", "Ice Blue", "Marine Blue", "Dark Blue", "Dark Red", "Lemon Yellow", "Dark Green" |
Reviews
There are no reviews yet.