-
Bambu Lab H2C
Product Features
- Hotend Change Multi-material Printing
- Minimal Purge Waste Multi-Color Printing
- Precise & Fast Inductive Nozzle Heating
- Close-loop Servo Extruder
- Full Filament Path AI Error Detection
- 350°C Nozzles & 65°C Active Heated Chamber
- Optional 10W/40W Laser and Cutting Module
- 330*320*325 mm³ Build Volume
Price range: 1.883,500 .د.ب through 2.799,900 .د.ب -
Bambu Lab H2D
- Dual-nozzle Multi-material 3D Printing
- Optional 10W/40W Laser and Cutting Module
- 350*320*325 mm³ Print Volume
- 5μm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
Price range: 1.276,350 .د.ب through 2.349,450 .د.ب -
Bambu Lab H2S
- 340*320*340 mm³ Print Volume
- Multi-color 3D Printing
- Closed-loop Servo Motor Extruder
- Optional 10W Laser and Cutting Module
- 5μm Resolution Optical Motion Calibration
- 350°C Nozzle & 65°C Active Chamber Heating
- Full Filament Path AI Detection
- Voltage Range: 200-240 V
PRE-ORDER ” ETA 25 APRIL 2026″
Price range: 1.078,000 .د.ب through 1.510,000 .د.ب -
Bambu Lab X2D
The Bambu Lab X2D is the second-generation printer in the acclaimed X Series, now optimized for advanced dual-material workflows. Featuring an innovative dual-nozzle system, it combines a Direct Drive head for model materials with a Bowden-fed auxiliary head for support structures. This makes the X2D the ultimate tool for creating complex engineering components requiring specialized supports for a flawless finish on a build volume of up to 256 x 256 x 260 mm.
Highlights
- Nozzle Switching Mechanism: Mechanical switching tested for over 1 million cycles without loss of performance.
- Hybrid Extrusion: Direct Drive for main material and Bowden for support material.
- Build Volume: Print capacity up to 256 x 256 x 260 mm (235.5 x 256 x 256 mm in dual-nozzle mode).
- Sensor-Driven Precision: 31 sensors continuously monitor material flow, temperature, and safety.
- Active Chamber: Heated build chamber up to 65 °C for engineering materials.
- Advanced Filtration: Three-stage air purification with G3 pre-filter, HEPA H12, and activated carbon.
- Quiet and Accurate: Noise level below 50 dB and motion accuracy down to 50 µm (with optional Vision Encoder).
Price range: 654,600 .د.ب through 887,600 .د.ب -
Bambu Lab P2S
ETA 10 June 2026
Price range: 500,700 .د.ب through 730,730 .د.ب -
Bambu Lab P1S Combo
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Built-in camera for remote monitoring and timelapse
627,900 .د.ب688,760 .د.بBambu Lab P1S Combo
627,900 .د.ب688,760 .د.ب -
Bambu Lab A2L
Key Features
- Includes Bambu Lab A2L and AMS Lite
- Massive 330 × 320 × 325 mm build volume
- Adaptive Vibration Compensation for smoother large prints
- Modular blade cutting and pen drawing support
- PMSM servo extruder with intelligent clog detection
- Multi-colour printing with the included AMS Lite (Combo)
Pre-order ETA 5 July 2026
Price range: 361,700 .د.ب through 482,100 .د.ب -
Bambu Lab P1S
- Works right out of the box, set up in 15 minutes
- Well-polished hardware and software
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Built-in camera for remote monitoring and timelapse
Available for Booking Now “ETA 05-06-2025”
459,410 .د.ب563,290 .د.بBambu Lab P1S
459,410 .د.ب563,290 .د.ب -
Bambu Lab A1 Combo
ETA 25 June 2026
360,000 .د.ب404,050 .د.بBambu Lab A1 Combo
360,000 .د.ب404,050 .د.ب -
Bambu Lab A1 mini Combo
Product Features
Full-auto Calibration.
4-Color Printing with AMS lite.
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.295,000 .د.ب342,470 .د.بBambu Lab A1 mini Combo
295,000 .د.ب342,470 .د.ب -
Bambu Lab A1
Product Features
- Full-auto Calibration
- Multi-Color Printing
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
ETA 25 June 2026
280,600 .د.بBambu Lab A1
280,600 .د.ب -
Bambu Lab AMS 2 Pro – Automatic Material System
Product Features- Active Air Vent 65°C Filament Drying
- Air-tight Filament Storage
- Up to 24-color/Multi-material Printing
- Brushless Servo Feeding Motor
- RFID Filament Sync
- AMS 2 Pro compatibility with A1/A1 mini printers will be added through an OTA update in Q3 2025.
- The AMS 2 Pro is compatible with X1/P1 series printers for multi-material printing.
- For X1/P1 owners, a switching adapter is needed to power the drying function. Since filament drying lasts long, you rarely need multiple adapters running simultaneously. The optional adapter helps lower the price.
- For H2D owners, your H2D can power anyone of the AMS 2 Pro(s) connected for drying, so if you’re not planning to run multiple AMS 2 Pro for drying simultaneously, you won’t be needing an adapter.
241,470 .د.ب259,850 .د.بBambu Lab AMS 2 Pro – Automatic Material System
241,470 .د.ب259,850 .د.ب
